• Search Catalog

Cart Summary

Shopping Cart Empty

NEW AND HOT

1 - 100 of 103 | Next
Add to Cart
Quantity On Hand: 4
Brand: LilyGo
ESP32 based board in the smallest package (31.2x39.0 mm), with JST 2-pin 1.25 mm battery connector and ON/OFF switch. Package contains 2x header pins, 2x long female pins and 4x short female pins.
11751 Your Price: €11.83
Add to Cart
Quantity On Hand: 4
Brand: Taulman 3D
Nylon 230 is the first nylon filament to be processed at 230°C or less, so you can now process nylon on your low temperature PLA or ABS 3D printer. Nylon 230 adheres to BlueTape (painter's adhesive tape) and even better to "buildTak" type surfaces and various PVA glues / glue sticks.
11754 Your Price: €33.50
Add to Cart
Quantity On Hand: 3
Brand: E3D
Original E3D Volcano 1.2 mm brass nozzle for 1.75 mm filament.
11757 Your Price: €10.12
Add to Cart
Quantity On Hand: 1
Brand: Duet3D
3D printer controller board based on 120MHz ARM Cortex M4F processor (512Kb flash, 128Kb RAM), 5x TMC2660 stepper motor dirivers, 1x bed heater (up to 18A) and 2x extruder outputs (up to 6A each), USB, Ethernet and high speed SD card reader. Compatible with RepRapFirmware 2.x and 3.x.
11758 Your Price: €208.94
Add to Cart
Quantity On Hand: 1
Brand: Devil Design
PETG 1.75 mm silver 1kg.
11748 Your Price: €21.00
Add to Cart
Quantity On Hand: 1
Brand: Devil Design
PLA 1.75 mm galaxy violet 1kg.
11749 Your Price: €21.00
Add to Cart
Quantity On Hand: 3
Brand: LilyGo
Development board based on ESP32 with addition of SIM800L module and LiPo battery connector, in combination with low sleep current makes it perfect for outdoor use. Comes with non-soldered headers and flex GSM antenna.
11746 Your Price: €18.40
Add to Cart
Quantity On Hand: 5
This cable adapter lets you get rid of microSD card on your Raspberry Pi 4 and use faster and more reliable 2.5" SSD. Cable is SATA-III (or less) and USB3.0 (or less) compatible, cable length is 130 mm.
11747 Your Price: €9.86
Add to Cart
Quantity On Hand: 4
Brand: e-radionica
Board is based on ESP32 chip, with WiFi and Bluetooth 4.0 (BLE), and RFM95W 868MHz LoRa transciever. Board has a connector and charger for a standard li-ion battery, and easyC (Qwiic compatible) connector. USB is used for power only, for program upload you need to use a programmer. This version comes with SMA antenna connector.
11738 Your Price: €26.25
Add to Cart
Quantity On Hand: 1
Brand: Fiberlogy
With the addition of glass fibers, PA12 + GF15 filament offers greater flexibility than Nylon with carbon fibers, making it ideal for applications that work under variable loads and are exposed to impact. Low susceptibility to shrinkage and high dimensional stability make it suitable for use in printers not equipped with a heated chamber, print temperature 255-270°C, bed 90-110°C.
11727 Your Price: €49.28
Add to Cart
Quantity On Hand: 2
Brand: Devil Design
PMMA (PolyMethyl MethAcrylate) more commonly known by trade names such as Plexiglas or Perspex, is commonly used as a shatter resistant alternative to glass. PMMA is very rigid and UV resistant material.
11729 Your Price: €24.50
Add to Cart
Quantity On Hand: 2
Brand: Devil Design
Nylon PA12 natural 800g.
11731 Your Price: €49.50
Add to Cart
Quantity On Hand: 2
Brand: Adafruit
ItsyBitsy M4 Express is only 36 mm long by 18 mm wide, but has 6 power pins, 23 digital GPIO pins (7 of which can be analog in, 2x analog out, and 18x PWM out). It's the same chip as the Metro M4 or Feather M4 but really really small. It even comes with 2MB of SPI Flash built in, for data logging, file storage, or CircuitPython code.
11719 Your Price: €21.29
Add to Cart
Quantity On Hand: 1
Brand: e-radionica
PLA MATT is a special type of PLA material which, thanks to admixtures, gives matt surfaces and noticeably better aesthetic look of the print surface. Layers are minimally visible while keeping the famous simplicity of PLA material. The print is also more resistant to impact and brittleness is lower.
11722 Your Price: €28.89
Add to Cart
No items available to ship
Brand: Creality
Second generation of Ender 3 printer includes silent motherboard, carbon coated glass bed, X and Y axis belt tensioners and color screen with brand new user interface. It keeps original 220x220x250 mm build volume, 0.4/1.75 mm hotend and aluminum heatbed. Kit is easy to bulid, it comes with instructions and all the tools you need to build it.
11710 Your Price: €328.52
Add to Cart
Quantity On Hand: 3
Brand: PrimaCreator
Includes 4 high quality brass nozzles (0.2-0.4-0.6-0.8 mm), compatible with Creality Ender and CR series.
11711 Your Price: €24.84
Add to Cart
Quantity On Hand: 1
Brand: Fiberlogy
Thanks to its resistance to high temperatures, alcohol and chemicals, Nylon is particularly useful for mechanical and technical applications and adding 15% of carbon fiber to it makes it twice as strong and stiff. Bed temperature ~100 °C, hotend 255-270 °C. Recommended use of hardened steel or or ruby nozzles.
11718 Your Price: €49.28
Add to Cart
No items available to ship
Brand: Fiberlogy
Fiberlogy PP filament creates the possibility of 3D printing with the second most used polymer in the world - Polypropylene. Due to its high resistance to damage and remarkable flexibility as well as resistance to chemical substances (acids, bases, water), it has found many applications in various fields of industry and everyday use.
11713 Your Price: €31.00
Add to Cart
Quantity On Hand: 2
Brand: Fiberlogy
Refill is a non-spool cartridge compatible with MasterSpool standard, which anyone can print by themselves using the RichRap's free and all-available project. This is more eco-friendly solution and slightly cheaper in comparison to the filaments on disposable spool.
11716 Your Price: €18.50
Add to Cart
Quantity On Hand: 1
Brand: Fiberlogy
Filament, which enables to create prints similar to plaster casts. This specific feature, combined with the precision of printing allows you to use it in the architectural and art studios, detailed prototyping and modeling. You can print mock-ups, as well as figures of non-standard shapes.
11720 Your Price: €38.00
Add to Cart
Quantity On Hand: 3
Brand: Adafruit
Give your ItsyBitsy project a lift with the Adafruit AirLift Bitsy Add-On - a daughterboard that lets you use the powerful ESP32 as a WiFi co-processor. This chip can handle all the heavy lifting of connecting to a WiFi network and transferring data from a site, even if its using the latest TLS/SSL encryption (it has root certificates pre-burned in).
11702 Your Price: €22.08
Add to Cart
Quantity On Hand: 1
Brand: Bigtreetech
This dual mode (touch screen or 12864 LCD mode) 3.5" touch screen is a drop-in replacement for Ender 3 LCD controller. It supports SD card and USB Flash drive printing, and has a WiFi module (ESP8266 ESP-01) support (WiFi module not includeed). It is compatible with the original Ender 3 mainboard, but it can be only used in 12864 mode (no touch screen) - for dual mode, SKR mainboard is needed.
11693 Your Price: €57.56
Add to Cart
Quantity On Hand: 2
Brand: FYSETC
TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 5.5V-36V, 3-5V logic, 256 subdivision.
11701 Your Price: €9.85
Add to Cart
Quantity On Hand: 1
Brand: Creality
Complete kit including original BLTouch, add-on board, extension cables, bracket and programmer. Fits almost all CR/Ender series printers (excl. CR-10S Pro).
11647 Your Price: €78.19
Add to Cart
Quantity On Hand: 1
This kit contains mounting bracket with screws, extension cables for BLTouch, pin 27 adapter board and programmer for firmware upload. BLTouch is not included.
11695 Your Price: €23.52
Add to Cart
Quantity On Hand: 2
Brand: Bigtreetech
This board comes with differently aligned MOSFETs which allows for better cooling with the included aluminum heatsink, uses SMD fuses and better power input terminal. In every other way, this board is the same as RAMPS 1.4.
11697 Your Price: €17.74
Add to Cart
Quantity On Hand: 2
Brand: Raspberry Pi
Raspberry Pi 4 Model B key features are a 64-bit quad-core Cortex-A72 processor, dual-display support at resolutions up to 4K, hardware video decode at up to 4Kp60, 8GB of RAM, dual-band 2.4/5.0GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0, and PoE capability (via a separate PoE HAT add-on).
11681 Your Price: €104.47
Add to Cart
Quantity On Hand: 5
Brand: UUGear
This is a 4-port USB 2.0 hub for Raspberry Pi Zero, and it can be mounted to Raspberry Pi Zero back-to-back. The 4 pogo pins on the back will connect the PP1, PP6, PP22 and PP23 testing pads on Raspberry Pi Zero, hence no soldering will be needed. This version of Zero4U only works with Raspberry Pi Zero (W/WH) V1.3 (with camera connector).
11685 Your Price: €15.38
Add to Cart
Quantity On Hand: 7
Brand: Pimoroni
Make your Raspberry Pi 4 seriously cool with Fan SHIM! This 30mm no-solder, controllable CPU fan with RGB LED and tactile switch will give your Raspberry Pi significantly better thermal performance. It's whisper-quiet too!
11686 Your Price: €12.35
Add to Cart
Quantity On Hand: 4
Brand: Pimoroni
Add a tiny yet convenient power switch to your Pi with OnOff SHIM! You can solder it directly to Raspberry Pi GPIO and use it in combination with HATs and other add-ons, or you can use the bundeled header.
11687 Your Price: €8.80
Add to Cart
Quantity On Hand: 5
Brand: Pimoroni
Mix and match 3 HATs or 5 pHATs into a platter of functionality. Use pHAT Stack for specific setups and projects, or just as a handy way to use several HATs or pHATs at once. This is fully assembled kit.
11688 Your Price: €18.66
Add to Cart
Quantity On Hand: 4
Brand: Kitronik
Enter the world of robotics with Simple Robotics kit and build your own easy build microbit controlled robot. It has been designed, from the ground up, to be simple to build by even the youngest of fingers. From its one piece cardboard chassis to its clip lead connections, everything goes together in a way that is as free from frustration as possible.
11676 Your Price: €35.35
Add to Cart
Quantity On Hand: 5
Brand: Kitronik
The Kitronik Discovery Kit for BBC microbit is a great way to get started with both programming and electronics. The Kit contains five experiments that start very simply, building up to simulating real world systems as confidence grows. This kit does not include a micro:bit.
11677 Your Price: €13.00
Add to Cart
Quantity On Hand: 2
Brand: Fiberlogy
Refill is a non-spool cartridge compatible with MasterSpool standard, which anyone can print by themselves using the RichRap's free and all-available project. This is more eco-friendly solution and slightly cheaper in comparison to the filaments on disposable spool.
11683 Your Price: €18.40
Add to Cart
Quantity On Hand: 2
Brand: Fiberlogy
FiberSilk Metallic provides a unique depth effect of the 3D model. Prints created with it are characterized by an intense metallic shine. The richness of colours, deep gloss, high durability and ease of printing make it one of the favourite filaments of every 3D printing enthusiast.
11656 Your Price: €30.00
Add to Cart
Quantity On Hand: 2
Brand: Fiberlogy
FiberSilk Metallic provides a unique depth effect of the 3D model. Prints created with it are characterized by an intense metallic shine. The richness of colours, deep gloss, high durability and ease of printing make it one of the favourite filaments of every 3D printing enthusiast.
11658 Your Price: €30.00
Add to Cart
No items available to ship
Dual pulley aluminium extruder kit for Creality CR-10x and Ender 3 series. Double gear extrusion mechanism provides high extrusion force, ensuring smooth filament feeding.
11671 Your Price: €20.89
Add to Cart
Quantity On Hand: 2
Brand: Micro Swiss
Micro Swiss Direct Drive Extruder is a drop in system for CR10 / Ender Printers. No need for additional parts or printed brackets.
11648 Your Price: €121.55
Add to Cart
No items available to ship
Brand: e-radionica
This board has a ToF (Time of Flight) distance sensor, which precisely determines the distance of the subject with a laser. It will detect objects from 40mm up to 4000mm (4m) from itself. It communicates via I2C and there are easyC connectors for easy connection.
11652 Your Price: €19.66
Add to Cart
Quantity On Hand: 7
Brand: e-radionica
Croduino NOVA32 is an extremely powerfull microcontroller board based on ESP32 microcontoller. We all know for ESP8266 Croduino NOVA2, and what can the ESP32 do? There is a standard full-featured WIFI, this time with Bluetooth 4.0 (BLE). The processor itself works on a 240MHz that has 520kB of RAM, 4MB of flash memory and two cores, which means it can do two things at once. There is also 28GPIO pins, very small consumption in sleep mode, support for capacitive touch input, hardware encryption...
11653 Your Price: €17.00
Add to Cart
Quantity On Hand: 3
Brand: Adafruit
This motor driver has a lot of great specs that make it useful for a wide variety of mechatronics. In particular, the simple resistor-set current limiting and auto-magic PWM support make it super easy to use with just about any brushed DC motor.
11645 Your Price: €11.69
Add to Cart
Quantity On Hand: 3
Brand: Devil Design
PETG 1.75 mm green transparent 1kg.
11649 Your Price: €21.00
Add to Cart
No items available to ship
Brand: NVIDIA
NVIDIA Jetson Nano Developer Kit is a small, powerful computer that lets you run multiple neural networks in parallel for applications like image classification, object detection, segmentation, and speech processing. All in an easy-to-use platform that runs in as little as 5 watts.
11587 Your Price: €170.50
Add to Cart
Quantity On Hand: 3
Based on ESP-WROOM-32 module, this 30-pin board is a powerful dual core microcontroller with 802.11 b/g/n/e/i WiFi, Bluetooth 4.2 and BLE connectivity. 25 GPIO pins cover all the interfaces you may ever need: UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S. Headers are included, but not soldered.
11638 Your Price: €12.62
Add to Cart
Quantity On Hand: 1
Brand: Bigtreetech
This is a drop-in replacement for Ender 3 and Ender 5 motherboard, based on 32-bit ARM Cortex M3 CPU, with integrated TMC2209 drivers in UART mode, with touchscreen and BL Touch support, runs Marlin 2.0 firmware.
11632 Your Price: €51.91
Add to Cart
Quantity On Hand: 8
Brand: Arduino
The Arduino Nano Every is an evolution of the traditional Arduino Nano board, but features a lot more powerful processor, the ATMega4809. This will allow you to make larger programs than with the Arduino Uno (it has 50% more program memory), and with a lot more variables (the RAM is 200% bigger).
11630 Your Price: €15.64
Add to Cart
Quantity On Hand: 5
Brand: Devil Design
PLA 1.75 mm dark gray 1kg.
11631 Your Price: €21.00
Add to Cart
No items available to ship
Brand: E3D
E3D Hemera - formerly Hermes - is (in their own words) the best extrusion system E3D's ever made. It combines market-leading E3D V6 HotEnd with an all-new filament drive to form a highly responsive direct drive extrusion system - providing unrivalled performance with flexible filaments. This is 1.75mm / 24V version.
11623 Your Price: €176.75
Add to Cart
No items available to ship
The Raspberry Pi 4 Basic Kit 4GB is the ideal package to get a quick start with your new Pi 4. Place your Pi in the official case, insert your pre-installed MicroSD card into the slot, connect screen and other peripherals(such as a mouse and/or keyboard), power up your Pi, and you're ready to go!
11624 Your Price: €116.82
Add to Cart
Quantity On Hand: 4
Brand: E3D
The strongest NEMA17 stepper motor in the house, with 80 N/cm holding torque, 1.8° step angle, 2A per phase rated current, 5 mm shaft and 60 mm body. Motor cable included.
11625 Your Price: €25.63
Add to Cart
Quantity On Hand: 1
Brand: e-radionica
The Maker LED display makes using LED matrix displays simple. The ready to use, fully assembled circuit board has everything you need to run a display - just plug it in! Using and customizing the display is easy, with a specially written Arduino library and a dozen pre-made examples. Maker LED display also has Wi-Fi so it can connect to the internet to retrieve and display information.
11567 Your Price: €32.15
Add to Cart
Quantity On Hand: 1
Brand: e-radionica
The Maker LED display makes using LED matrix displays simple. The ready to use, fully assembled circuit board has everything you need to run a display - just plug it in! Using and customizing the display is easy, with a specially written Arduino library and a dozen pre-made examples. Maker LED display also has Wi-Fi so it can connect to the internet to retrieve and display information.
11568 Your Price: €32.15
Add to Cart
Quantity On Hand: 1
Brand: e-radionica
The Maker LED display makes using LED matrix displays simple. The ready to use, fully assembled circuit board has everything you need to run a display - just plug it in! Using and customizing the display is easy, with a specially written Arduino library and a dozen pre-made examples. Maker LED display also has Wi-Fi so it can connect to the internet to retrieve and display information.
11569 Your Price: €32.15
Add to Cart
Quantity On Hand: 4
Brand: e-radionica
The SGP30 is a very interesting sensor out of the latest generation that gives us information on indoor air quality. Designed for installation in air purification devices and Internet of Things projects. It consists of many metal-oxide measuring elements that the manufacturer calls pixels that are embedded in a single packet called multi-pixel.
11579 Your Price: €26.77
Add to Cart
Quantity On Hand: 8
Brand: Fiberlogy
Fiberlogy R PLA is a filament created 100% in the recycling process. It is obtained entirely from raw material derived from carefully selected and verified sources. R PLA represents the highest quality, which is in no way inferior to the well-known EASY PLA.
11607 Your Price: €16.75
Add to Cart
Quantity On Hand: 2
Brand: Fiberlogy
Fiberlogy PP filament creates the possibility of 3D printing with the second most used polymer in the world - Polypropylene. Due to its high resistance to damage and remarkable flexibility as well as resistance to chemical substances (acids, bases, water), it has found many applications in various fields of industry and everyday use.
11608 Your Price: €31.50
Add to Cart
Quantity On Hand: 5
Brand: e-radionica
Finally, you'll be able to connect your micro:bit projects to the Internet and to connect to already known Internet of Things. WiFi:bit add-on is easy to use through a MakeBlock add-on or using completed Python examples.
11601 Your Price: €14.66
Add to Cart
Quantity On Hand: 4
Brand: Raspberry Pi
Raspberry Pi 4 Model B key features are a 64-bit quad-core Cortex-A72 processor, dual-display support at resolutions up to 4K, hardware video decode at up to 4Kp60, 4GB of RAM, dual-band 2.4/5.0GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0, and PoE capability (via a separate PoE HAT add-on).
11599 Your Price: €78.84
Add to Cart
No items available to ship
Brand: Fiberlogy
Impact PLA is a technical filament with increased impact strength. Its parameters exceeding even the ABS. While keeping the ease and security of the printing process typical of traditional PLA, Impact PLA is ideal for creating demanding prints.
11593 Your Price: €25.00
Add to Cart
Quantity On Hand: 1
Brand: Fiberlogy
Thanks to its resistance to high temperatures, alcohol and chemicals, Nylon is particularly useful for mechanical and technical applications. It is extremely durable, strong and flexible - it expands by 50% before it breaks. Bed temperature ~100 °C, hotend 255-270 °C.
11597 Your Price: €42.00
Add to Cart
Quantity On Hand: 2
Brand: Creality
Upgraded silent motherboard for Ender 3 (can be used on Ender 3 PRO and Ender 5 after flashing firmware) uses TMC2208 stepper motor drivers. Comes preloaded with Marlin 1.1.8.
11588 Your Price: €55.85
Add to Cart
No items available to ship
Brand: Mikrotron
Let your Micro:bit take care of your plant(s) - this kit has everything you need (except the Micro:bit itself) to do just that.
11585 Your Price: €35.35
Add to Cart
Quantity On Hand: 3
Brand: Kitronik
:MOVE mini MK2 buggy kit for the BBC micro:bit is the latest version of :MOVE mini - a fun introduction to the world of robotics. The :MOVE mini is a 2 wheeled robot that is suitable for autonomous operation, remote control projects via a Bluetooth application or being controlled using a second BBC micro:bit as a controller via the microbits radio functionality.
11582 Your Price: €33.51
Add to Cart
Quantity On Hand: 12
Brand: Kitronik
The Linear Actuator converts the circular movement of the supplied servo into movement in a straight line. Ideal for robots, dioramas or train points switching.
11583 Your Price: €8.55
Add to Cart
Quantity On Hand: 2
Brand: PrimaCreator
Kit contains 12 cleaning needles of five different sizes (0.2-0.4 mm) and lengths, and a pair of tweezers.
11573 Your Price: €9.86
Add to Cart
Quantity On Hand: 3
ABS plastic case for Raspberry Pi 4 Model B with all the cutouts, including GPIO and camera/display slots. Supports a 5V cooling fan (thin 3007 fan only), fan is not included in the package.
11580 Your Price: €6.31
Add to Cart
Quantity On Hand: 1
Brand: Raspberry Pi
Raspberry Pi 4 Model B key features are a 64-bit quad-core Cortex-A72 processor, dual-display support at resolutions up to 4K, hardware video decode at up to 4Kp60, 2GB of RAM, dual-band 2.4/5.0GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0, and PoE capability (via a separate PoE HAT add-on).
11575 Your Price: €52.43
Add to Cart
Quantity On Hand: 7
Brand: Raspberry Pi
This black official Raspberry Pi power supply is specifically designed for the new Raspberry Pi 4. The adapter has a captive USB-C cable and fits EU power outlets. The power supply cannot be used with older versions of the Raspberry Pi.
11576 Your Price: €13.80
Add to Cart
No items available to ship
Micro HDMI(HDMI-D) to HDMI cable with a length of 1 m, ideal for (among others) the Raspberry Pi 4.
11577 Your Price: €9.07
Add to Cart
Quantity On Hand: 1
Brand: Bigtreetech
32-bit 3D printer controller board based on 100 MHz ARM Cortex-M3 CPU (LPC1768 chip), 12-24V input voltage, full support for TMC drivers, Marlin 2.0 or Smoothieware firmware supported. Package includes USB cable and 128MB microSD card for firmware upload.
11574 Your Price: €32.85
Add to Cart
Quantity On Hand: 2
Brand: Kitronik
The :GAME ZIP 64 is the ultimate retro handheld gaming platform for the micro:bit. It's got everything; a 8x8 ZIP LED screen, programmable buttons, haptic feedback and more. It can also be coded to be a controller for your buggy or robotics projects.
11555 Your Price: €40.74
Add to Cart
Quantity On Hand: 1
Brand: Creality
The latest in the Ender series, Ender 5 brings new box frame design for even better print quality and extends print volume to 220x220x300 mm.
11557 Your Price: €387.65
Add to Cart
No items available to ship
Brand: Creality
Tempered glass plate is 4 mm thick and it's covered by microporous coating, which provides strong adhesion in printing, but once cooled down, it's easy to remove print.
11558 Your Price: €22.21
Add to Cart
No items available to ship
Brand: Geekcreit
This product combines 802.11b/g/n WiFi + BT/BLE SoC module, low power dual-core 32-bit CPU with 9 IO ports, microSD card reader and OV2640 camera module in just 27x40.5x11.5 mm.
11570 Your Price: €13.00
Add to Cart
Quantity On Hand: 2
This is 5MP camera (same as v1 RPi camera) with 160° wide-angle lens and IR LEDs that allows it to see in the dark. If you're building surveillance system, look no further! It comes with both standard and Pi Zero camera cable (15 cm long).
11547 Your Price: €23.00
Add to Cart
Quantity On Hand: 2
Brand: Raspberry
The Raspberry Pi TV HAT allows you to receive digital terrestrial TV broadcast systems (DVB-T and DVB-T2) on a Raspberry Pi. With the board you can receive and view TV on a Raspberry Pi or create a TV server that allows you to stream received TV over a network to other devices.
11548 Your Price: €32.85
Add to Cart
Quantity On Hand: 3
Brand: Fiberlogy
EASY PET-G combines the ease of printing with PLA and high strength comparable to that of the traditional PET-G.
11533 Your Price: €20.50
Add to Cart
Quantity On Hand: 1
Brand: Kitronik
The Kitronik Inventor's Kit for Arduino is a great way to get started with programming and hardware interaction with the Arduino. This Inventor's Kit contains everything you need to complete 10 experiments including using LEDs, motors, LDRs and capacitors.
11527 Your Price: €30.88
Add to Cart
Quantity On Hand: 6
This aluminium extruder kit is a drop-in replacement for the original plastic extruder on CR-10 and Ender-3 printers.
11528 Your Price: €15.64
Add to Cart
Quantity On Hand: 2
Brand: Fiberlogy
Thanks to its resistance to high temperatures, alcohol and chemicals, Nylon is particularly useful for mechanical and technical applications. It is extremely durable, strong and flexible - it expands by 50% before it breaks. Bed temperature ~100 °C, hotend 255-270 °C.
11529 Your Price: €44.00
Add to Cart
Quantity On Hand: 2
Brand: Kitronik
The FM Radio has controls for tuning and to adjust the volume. Includes an audio amplifier and output is via a 66mm speaker. Powered by batteries or mains. FM telescopic antenna included.
11517 Your Price: €17.74
Add to Cart
Quantity On Hand: 1
Brand: Raspberry
The Raspberry Pi PoE HAT is an add-on board for the Raspberry Pi 4 or 3 Model B+. It is used to power the Raspberry Pi via an Ethernet cable, provided that power-sourcing equipment is installed on the Ethernet network.
11518 Your Price: €28.91
Add to Cart
Quantity On Hand: 1
Brand: Pycom
The LoPy4 is a quadruple bearer MicroPython enabled development board (LoRa, Sigfox, WiFi, Bluetooth) perfect enterprise grade IoT platform for your connected Things. 1 year of Sigfox connectivity included!
11501 Your Price: €51.25
Add to Cart
Quantity On Hand: 1
Brand: Fabbrix
PC ABS combines the robustness and resistance to heat of the polycarbonate with ABS flexibility and it's commonly used in automotive and electronics applications. Printing temperature: 240-280°C, bed temperature: 95-110°C.
11502 Your Price: €51.34
Add to Cart
Quantity On Hand: 10
Brand: Kitronik
The Kitronik Prong soil moisture sensor for BBC microbit is a sensor board that can be directly mounted to a BBC micro:bit to monitor moisture present in soil.
11504 Your Price: €4.34
Add to Cart
Quantity On Hand: 1
Brand: Creality
Original Creality 3D magnetic print surface for Ender-3 Pro or CR20 Pro, 235x235 mm, includes bottom sheet for the build platform.
11492 Your Price: €17.74
Add to Cart
Quantity On Hand: 3
Brand: Creality
Original Creality 3D replacement print surface for Ender-3 with 3M adhesive back side. Works on other printers too, you can easily cut it to the size of your printer with scissors.
11495 Your Price: €9.86
Add to Cart
Quantity On Hand: 1
Brand: Devil Design
Multimaterial startpack contains 6x0.33 kg spools including 6 different materials: PLA, ABS, TPU, HIPS, PETG, ASA. All materials are natural color (no pigment).
11427 Your Price: €50.00
Add to Cart
Quantity On Hand: 1
Brand: Antclabs
BLTouch is an auto leveling sensor for 3D printers that can precisely measure the tilt of Bed surface. It is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensor. This is genuine BLTouch by Antclabs.
11475 Your Price: €49.80
Add to Cart
Quantity On Hand: 9
Brand: RobotDigg
Reusable build surface with 3M tape, 214x214 mm.
11376 Your Price: €9.20
Add to Cart
No items available to ship
Brand: Kitronik
The :GAME Controller is a handheld gaming platform for the micro:bit. It's got; programmable buttons, haptic feedback & more. Use it for games or robot control!
11472 Your Price: €15.64
Add to Cart
Quantity On Hand: 1
Brand: Arduino
MKR WAN 1300 is a powerful board that combines the functionality of the MKR Zero and LoRa connectivity. It is the ideal solution for makers wanting to design IoT projects with minimal previous experience in networking having a low power device.
11438 Your Price: €55.06
Add to Cart
Quantity On Hand: 8
Brand: e-radionica
Croduino NOVA 2 is microcontroller board capable of connecting to WiFi Internet network. It is based on very popular ESP8266 which was struggle to use standalone. With NOVA, just plug the board into USB port and start programming your next Internet-connected project(IoT)!
11440 Your Price: €13.00
Add to Cart
Quantity On Hand: 1
Brand: The Things Network
The Things Node is based on the SparkFun Pro Micro and has an added Microchip LoRaWAN module along with an embedded antenna. It contains a temperature sensor, digital accelerometer, light sensor, button and RGB LED. All this is packaged in a matchbox sized waterproof casing. The Things Node is an ideal LoRaWAN device to start prototyping your ideas.
11409 Your Price: €77.40
Add to Cart
Quantity On Hand: 2
Brand: Seeed Studio
The Grove - LoRa Radio 868MHz module has a RFM95 module, which is a transceiver featuring the LoRa long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. A simple wire antenna is wired on-board to receive signal. If the signal is too weak to receive, don’t worry, the MHF (U.FL) connector next to the antenna is for adding a second antenna to gain more signal.
11431 Your Price: €27.46
Add to Cart
Quantity On Hand: 4
Brand: Kitronik
Take your micro:bit robotics builds to the next level with the Kitronik All-in-one Robotics Board for the BBC micro:bit. The All-in-one Robotics Board enables the BBC micro:bit (connected via a standard card slot connector) to drive 4 motors (or 2 stepper motors) and 8 servos. Coupled with 17 other I/O expansion points, this means the BBC micro:bit can very easily become the core of a whole variety of robotics projects.
11398 Your Price: €21.03
Add to Cart
Quantity On Hand: 3
Brand: Kitronik
This RTC & Klimate board is a Real Time Clock (RTC) and environmental sensor (BME280) interface for the BBC microbit. The environmental sensor will give the ability to measure temperature, barometric pressure and humidity. The RTC will give the ability to read current time and date.
11399 Your Price: €19.05
Add to Cart
Quantity On Hand: 1
Brand: Adafruit
This feather is powered by the ATSAMD51J19 - with its 120MHz Cortex M4 with floating point support and 512KB Flash and 192KB RAM. Your code will zig and zag and zoom, and with a bunch of extra peripherals for support, this will for sure be your favorite new chipset. And best of all, it's a Feather - so you know it will work with all FeatherWings!
11382 Your Price: €34.17
Add to Cart
Quantity On Hand: 3
Brand: Fiberlogy
Refill is a non-spool cartridge compatible with MasterSpool standard, which anyone can print by themselves using the RichRap's free and all-available project. This is more eco-friendly solution and slightly cheaper in comparison to the filaments on disposable spool.
11363 Your Price: €18.50
Add to Cart
Quantity On Hand: 3
Brand: Adafruit
Here comes the fastest, most powerful Metro ever. The Adafruit Metro M4 featuring the Microchip ATSAMD51. This Metro is like a bullet train, with it's 120MHz Cortex M4 with floating point support. METRO has 25 GPIO pins, 8 of which are analog in, and two of which is a true analog out. There's a hardware SPI port, hardware I2C port and hardware UART. Logic level is 3.3V.
11356 Your Price: €45.99
1 - 100 of 103 | Next